Vibrating & wet screeds
Screed for finishing prefab elements.
The Prefab Easy Screed is made for levelling prefab elements to a fine finish. A double-insulated (IP54) drive unit pairs with lightweight beams in a range of lengths, all interchangeable through a simple clamping system, and an electronic speed regulator lets the operator match the vibration to the consistency of the concrete. Light in the hand and easy to use, it produces a consistently flat result.
| Beam length (m) | Beam weight excl. drive (kg) | Frequency (RPM) | Drive power | Voltage | Total weight (kg) |
|---|---|---|---|---|---|
| 1.52 | 4.4 | Up to 11,000 | 350 W | 230V 50-60Hz | 16.9 |
| 1.83 | 5.3 | Up to 11,000 | 350 W | 230V 50-60Hz | 17.8 |
| 2.44 | 7.1 | Up to 11,000 | 350 W | 230V 50-60Hz | 19.6 |
| 3.05 | 8.8 | Up to 11,000 | 350 W | 230V 50-60Hz | 21.3 |
| 3.66 | 10.6 | Up to 11,000 | 350 W | 230V 50-60Hz | 23.1 |
| 4.27 | 12.4 | Up to 11,000 | 350 W | 230V 50-60Hz | 24.9 |
| 4.88 | 14.2 | Up to 11,000 | 350 W | 230V 50-60Hz | 27.7 |
Figures transcribed from Lievers Holland data sheets. Values are never invented; “—” means no data.
Comparison
Each machine in this category is designed for the same application, but optimized for different power options, site conditions, and user requirements.
You're viewing
Screed for finishing prefab elements.
Continuous power straight from the mains.
Battery-powered wet screed.
Cordless and emission-free — full freedom on site.
Tell us what you do — we'll recommend the right model, no obligation.
For levelling prefab elements to a fine, flat finish. It pairs a lightweight beam with a double-insulated (IP54) electrical drive unit and an electronic speed regulator, so the operator can match the vibration to the concrete consistency — the drive runs at up to 11,000 RPM on a 350W, 230V motor.
Yes. A user-friendly clamping system with removable handles lets you swap beams in lengths from 1.52 to 4.88 m, all interchangeable with the same drive unit. The drive is 230V/50-60Hz as standard, with 115V/50-60Hz available on request.
Every Lievers machine, including the Prefab Easy Screed, comes with a one-year warranty. Register your machine and you get a second year on top — two years of cover in total.
Lievers machines are backed by a network of local service points with spare parts on hand, so maintenance and repairs on your Prefab Easy Screed stay close to the job. Get in touch and we'll point you to the nearest one.
