Lievers Holland
K150Li — Battery-powered wet screed.

Vibrating & wet screeds

K150LiVibrating & wet screeds

Battery-powered wet screed.

Battery
See our zero-emission range

What sets it apart.

Lightweight & maneuverable
A light wet screed that's easy to guide across the slab, even on long pours.
Electronic speed control
An electronic speed regulator lets you dial in the right finish.
Two batteries as standard
Comes with two batteries, with a third available as an option.
Shared batteries
Batteries are interchangeable with the P18Li poker vibrator.

A lightweight wet screed that is easy to maneuver, with an electronic speed regulator. It comes with two batteries as standard and is optionally available with three. The batteries are interchangeable with the P18Li.

Best for

Technical data

TypeDrive unitVibrationsWeight
K150Li18V BLDC 750W2,500–7,000 per min11 kg

Figures transcribed from Lievers Holland data sheets. Values are never invented; “—” means no data.

Comparison

How it compares

Each machine in this category is designed for the same application, but optimized for different power options, site conditions, and user requirements.

K150Li

You're viewing

K150Li

Battery

Battery-powered wet screed.

Cordless and emission-free — full freedom on site.

K-150

 

K-150

Wet screed for screeds and floors.

HAL 200

 

HAL 200

Wet screed for larger areas.

Torn between models?

Tell us what you do — we'll recommend the right model, no obligation.

Frequently asked questions

How many batteries does the K150Li come with?

Two 18V/5Ah batteries as standard, with a third available as an option. Each battery runs the K150Li for roughly 30 to 50 minutes depending on the speed setting, and recharges in as little as 75 minutes.

Can I share batteries with other machines?

Yes — the K150Li runs on the same 18V Lievers battery system as the HAL200Li and P18Li poker vibrator, so batteries are interchangeable across your cordless fleet. Its 750W brushless motor drives 2,500–7,000 vibrations/min at an 11 kg weight, about 27% lighter than the K-150 B and K-150 ER it builds on.

Can I control the speed?

Yes — a standard speed controller lets you match vibration to the concrete consistency, running the 750W brushless motor from 2,500 to 7,000 vibrations per minute across the 1.5 m working width.