Industrial flooring
Large-area pours that stay flat across the whole slab and hard where the forklifts run — levelling, compaction and troweling with no weak spots.
An industrial floor isn't just pouring concrete — it's a level plane and a surface that shrugs off traffic and wear. Lievers' vibrating beams, screeds and trowels work together so a big slab comes out flat the first time. Dutch design and build.
What to use
Every stage of a floor has its machine. Tell us what you're doing now.
Vibrating beams
A truss beam strikes off and compacts wide bays in one pass. The petrol-driven DTA, or the DTR as a simple, rugged option.
Spotlight
Over a large area, the first stage decides the result. The DTA vibrating beam strikes off and compacts a wide bay in one pass, leaving a flat base the trowel only has to finish.
Flatness starts at the strike-off, not the trowel. A vibrating beam like the DTA levels and compacts a wide strip in one pass — beam lengths run 3.2 to 7.2 m with up to 200 mm of vibration penetration at 3,000 rpm, and a stressing bar pre-stresses out any sag to hold an accurate level. Only then does a power trowel finish the surface; for cordless work the LTM eGX runs blade speeds of 40–140 rpm off a swappable Honda battery.
A truss beam like the DTA is the fastest way to cover a wide, open slab — it strikes off and compacts a bay up to 7.2 m long in a single pass. A screed such as the K-150 (just 9 kg at a 1.5 m working width) or the single-pass DUOSCREED is nimbler and suits a set pour thickness on smaller bays. On a large floor it's common to run both — beam for the main pour, screed for edges and infill.
Yes — electric and battery trowels avoid exhaust entirely. The LTM E runs on 230V or 400V with stepless speed regulation, the LTM eGX is fully cordless on a swappable Honda battery, and the E-LAP 450N is a lightweight electric jumping screed (about 22 kg) suited to renovation work where air quality matters.
Yes. Give us the area, thickness and deadline and we'll match the beams, screeds and trowels — a DTA beam to strike off a large bay, then ride-on trowels like the JWN/HTN/HHN or the hydrostatic HTX/STX to finish metre after metre, so your crew is off the slab on schedule.
Every machine carries a 1-year warranty, with a second year free when you register it. We keep local service points and spare parts to keep downtime short.
Let's talk
Tell us about your work — we'll recommend the machines and prepare a quote. No obligation.
